Repair service by Stove Care

GLEM GAS / STOVE CARE

Glem Gas Spare parts

Name: Stove Care
Address: 20 Mostafa Roshdy Street, Ahmed Orabi, Mohandessin, Giza, EG
Telephone: 19224

Glem Gas Spare parts from Stove Care. Explore service options, common faults and parts information. Call 19224 with your appliance model and area.

Call now 19224 WhatsApp

Model-aware inspectionDetails before booking

Glem Gas parts — start with the specification

Ordering a part for a Glem Gas appliance starts with the model number and an accessible photo. A similar-looking part may differ in size, rating or safety function. Compatibility must be checked before selecting an option.

Component	What must match?
Ignition assembly	Connection, voltage and appliance type
Safety sensor	Length, mounting and model specification
Thermostat and temperature sensor	Operating range, connector and part number
Hinges and door seal	Door dimensions and mounting points
Oven glass	Glass layer, location and thermal specification
Control board	Board number, revision and model compatibility

When is replacement appropriate?

Repeated symptoms do not prove a particular part has failed. Supply, mounting and related components should be inspected before replacement. Keep the original component information until compatibility is confirmed.

Cooker will not ignite Weak cooker flame Automatic ignition not working Faulty cooker control knob

Original parts, alternatives and price

Ask about the component source and number, whether it is original or a compatible alternative, and whether installation is included. Availability and supply time are confirmed for the specific model.

Ask about the specific part and repair warranty before work.

A quote starts with understanding the fault

Confirm the visit and diagnosis fee before booking. The repair quote follows inspection and is discussed before work begins.

Appliance model and component specification.
Whether the component can be repaired or needs replacement.
Connection condition and access to built-in appliances.
Part availability, origin and warranty terms.

STOVE CARE GUIDE

A practical guide before requesting Glem Gas service

Open the detailed guide when you need itSteps, tables and useful questions

A symptom observation map

The best service request is not the longest. It identifies appliance type, model, symptom and location, then leaves diagnosis to inspection.

If there is a gas or burning smell, sparking or damaged glass, stop use and move away from the hazard. Do not remove connections or covers to reach the cause.

Daily use

عدد مرات الاستخدام ونوع أواني الطهي وطريقة التنظيف تفاصيل مهمة، لكنها لا تغني عن فحص مصدر المشكلة.

Useful details: model, function, symptom timing and available photos.

Insufficient on their own: a brand name or a part guessed from appearance.

Your appliance file in one minute

Arrange the information this way before calling or messaging. Each card turns a general observation into a useful inspection detail.

First appliance snapshot

Photograph the front and accessible label without moving the appliance or removing a cover. A useful photo answers many questions.

Describe the symptom precisely

Answer: Does another function still operate normally? Can the appliance be accessed without removing cabinetry or connections? Keep it to two clear lines rather than guessing a cause.

Agree before work begins

Before repair, review the symptom being addressed, the repair or replacement option, price and warranty.

Review after the visit

Keep a photo of the label and model number with the purchase or warranty records; it reduces guesswork in follow-up. Run the affected function only after the technician explains safe use and what to monitor.

Information cards that save inspection time

You do not need to know the technical cause. Prepare these details and let the professional verify the model and condition.

Recent history

Recent installation, cleaning, repair or power cut; useful context, not proof of cause.

Model details

A photo of the accessible label or number on the front, without removing anything.

Affected function

Ignition, heating, fan, extraction, display or door. Name the function rather than only the appliance.

Symptom timing

At start-up, after heating, at a certain speed or after cleaning. Timing changes the inspection questions.

Photo or code

Keep a photo of a displayed code or affected area instead of recalling an approximate description.

Access details

State whether it is built-in, behind cabinetry or in a location requiring access arrangements.

Five questions that make your request clearer

Does another function still operate normally?
Can the appliance be accessed without removing cabinetry or connections?
Is one function affected, or the whole appliance?
Is there a clear photo of the front and accessible model label?
Can a displayed message or code be photographed rather than recalled from memory?

The limits of remote diagnosis

Photos and descriptions help prepare a visit, but do not prove a fault cause or required component. Do not use general content or another appliance experience to select a part.

Repair decision: what to ask before approving?

The following separates helpful details from assumptions. There is no single answer for every model, so inspection and a clear work proposal remain the basis for a decision.

Situation	Information that supports the decision
A display code or electrical trip	Photograph the code and avoid repeated resets or breaker cycling. It needs to be assessed with the appliance model and condition.
A change after cleaning or moving	Report the timing accurately. It can guide inspection, but it does not justify dismantling connections at home.
A built-in appliance	Review ventilation, access and mounting before trying to move or remove it.
A display code or electrical trip	Photograph the code and avoid repeated resets or breaker cycling. It needs to be assessed with the appliance model and condition.

Visit planning board: from first message to final review

This table does not set an appointment or price automatically. It helps you reach an organized call and a clear service proposal.

Visit stage	What should you prepare or ask?
Before contact	Gather accessible details and photos; identify the address and access conditions.
When explaining the issue	Describe the symptom, timing and affected function without assuming a cause or part.
Before booking	Confirm service availability, timing and diagnosis or travel fees in your area.
Before work starts	Review inspection findings, repair or replacement option, price and warranty.
After completion	Check the affected function with the technician and retain work and part details.

After service: review the outcome clearly

The goal is not to test every function randomly. It is to check the symptom that prompted service and understand what to monitor afterwards.

Keep a photo of the label and model number with the purchase or warranty records; it reduces guesswork in follow-up.
Run the affected function only after the technician explains safe use and what to monitor.
Do not alter settings or connections merely to test the result; note any returning symptom and when it occurs.
Keep a photo of the label and model number with the purchase or warranty records; it reduces guesswork in follow-up.

Glem Gas service in your area

6th of October Alexandria Dokki Faisal Hadayek Al-Ahram Haram Heliopolis Maadi Madinaty Mansoura Menofia Mohandessin Nasr City New Cairo North Coast Obour Rehab Sharqia Sheikh Zayed Shorouk Tanta Zamalek

Contact us to confirm a visit and timing. Area pages help identify your service location; they do not represent separate branches.

Glem Gas service questions

How do I contact Stove Care about Glem Gas?

Stove Care booking and enquiries: 19224, or WhatsApp 01205709369. These are Stove Care contacts, not the manufacturer’s official hotline.

How do I book a repair?

Call 19224 or WhatsApp 01205709369 with the appliance type, brand, model, area and fault. We will discuss service availability and the appointment before confirming a visit.

What does a visit or repair cost?

Ask about the visit and diagnosis fee in your area before booking. Repair cost is determined after inspection and your approval.

Will the part match my model?

Part selection depends on the model number and original component specification. Ask about the available option and its cost before installation.

What warranty applies?

Ask for the specific repair and replacement-part warranty period and conditions before the work begins.

My appliance is still under manufacturer warranty. What should I do?

Contact the provider named in your warranty documents first and check its repair conditions. Manufacturer warranty is separate from an independent repair warranty.

Let’s arrange the next step.

Send the brand, model and fault description to discuss your service visit.